Table of Contents
Advertisement
Emission Control (Exhaust & Evaporative)
EPA 2010 and Later and/or C.A.R.B. TIER III
The emission control system for the engine is EM (engine modification) and, if the second to last character of the Engine
Family on the Emission Control Information label (sample below) is "B" ,"C", "K", or "T", the emission control system is EM
and TWC (3-way catalyst). The fuel tank/fuel line emission control system is EVAP (evaporative emissions). Evaporative
emissions for California models are only applicable to fuel tanks.
An Emission Control Label is located on the engine. (This is an EXAMPLE ONLY; information on label varies by engine
FAMILY).
PRODUCT EMISSION DURABILITY (EMISSION COMPLIANCE PERIOD)
The 50 or 300 hour emission compliance period is the time span selected by the manufacturer certifying the engine
emissions output meets applicable emissions regulations, provided that approved maintenance procedures are followed
as listed in the Maintenance Section of this manual.
Unit Description
Familiarize yourself with your machine and its various components. Understanding your machine helps ensure top perfor-
mance, long service life, and safer operation.
Prior to use
Before using this product, please make sure you have all the components required for a complete unit:
■
Engine assembly and gearcase/cutter assembly
■
Blade Cover
Carefully inspect all components for damage.
WARNING!
Do not make unauthorized modifications or alterations to this machine or any of its components or accessories.
Fuel Tank
ON-OFF
Switch
Figure 3
6
Cutter
Blade
Cover
Fuel Cap
Choke
Air Cleaner
Cover
Gearcase
■
Operator's Manual
■
Emission Control Warranty Statement
Guide Bar
Protector
Muffler
Throttle
Trigger
Support Handle
For Left Hand
Recoil
Starter
Throttle Handle
For Right Hand
Advertisement
Table of Contents
