Table of Contents
Advertisement
Safety (continued)
The Properly Equipped Operator
Wear hearing protection devices and a
broad-brimmed hat or helmet. A helmet
is required when using a blade-equipped
brushcutter to clear small trees.
Prolonged exposure to excessive noise
is fatiguing and could lead to impaired
hearing.
Wear close-fitting clothing to
protect legs and arms. Gloves
offer added protection and are
strongly recommended. Do not
wear clothing or jewelry that
could get caught in machinery
or underbrush. Secure long hair
so that it is above shoulder level.
NEVER wear shorts!
Long-term exposure to vibration
can damage your hands.
Keep a proper footing and do not
overreach. Maintain your balance at all
times during operation.
Wear appropriate footwear (non-skid
boots or shoes): do not wear open-
toed shoes or sandals. Never work
barefooted!
Be Aware of the Working Environment
Avoid long-term
operation in very hot
or very cold weather.
Be extremely careful
of slippery terrain,
especially during rainy
weather.
Be constantly alert for
objects and debris that
could be thrown either
from the rotating cutting
attachment or bounced
from a hard surface.
4
Always wear a harness when operating the unit .
It adds comfort and helps ensure safety by limiting
adjusted properly, the unit should balance with the
Make sure
bystanders
or observers
outside the
15 meter (50
feet) "danger
zone" wear eye
protection.
15 METERS
(50 FEET)
Always make sure
the appropriate
cutting attachment
shield is correctly
installed.
Always wear eye protection such as
goggles or safety glasses to shield
against thrown objects.
movement fore and aft. When the harness is
cutting attachment parallel to the ground.
Always operate with both hands
firmly gripping the unit.
When operating with a blade, make sure
the handle is positioned to provide you with
maximum protection from contacting the
blade. Always make sure the handlebar
is installed in accordance with the
manufacturers instructions.
Always make sure the
appropriate cutting attachment
shield is correctly installed and
in good condition. Do not
operate the unit if the
cutting attachment shield
is missing, loose, or
Keep away from the rotating
trimmer line or blade at all
times, and never lift a moving
attachment above waist-high.
Reduce the risk of bystanders
being struck by flying debris. Make
sure no one is within 15 meters
(50 feet)— that's about 16 paces
of an operating attachment. Stop
immediately if a child, pet, or
person comes within a 15 meter
(50 feet)radius. Outside this radius,
there is still a risk of injury from
thrown objects.
Do not operate the unit if the
cutting attachment shield is
missing, loose, or broken.
Beware of a coasting blade when
brushcutting or edging. A coasting
blade can injure while it continues
to spin after the throttle trigger
is released or after the engine is
stopped.
ALWAYS clear your work area of trash
or hidden debris that could be thrown
back at you or toward a bystander.
When operating in rocky terrain or
near electric wires or fences, use
extreme caution to avoid contacting
such items with the cutting attachment.
If contact is made with a hard object,
stop the engine and inspect the cutting
attachment for damage.
broken.
Hide quick links:
Advertisement
Table of Contents
