Hardware; Help - M-Audio Portman 4x4 Manual

Delete Config
Delete a SMPTE configuration from the provided list.
Confirm Exit
If this is checked, you will always be asked to confirm that you
actually want to quit the program (a good choice for people who
are mildly paranoid about losing any of their work). On the other
hand, if you are irritated by the confirmation dialog and don't
want to be re-asked each time you choose to exit the program,
uncheck this selection.
Exit
Quit the program. If the "Confirm Exit" option is checked (see
above) the program will have you confirm that you want to quit
before it actually closes.

Hardware

Current Status
Gives you the current status of the PORTMAN MIDI drivers, and
displays whether or not the PORTMAN hardware is present and
detected.
Patchbay
Brings up the patchbay setup dialog box. This is where you can
configure your own user programs.
SMPTE Test
Gives you the current status of the SMPTE reader. This pop-up
dialog will tell you whether or not the PORTMAN is currently
locked to SMPTE and what the incoming SMPTE format is. This
feature is very handy if you are experiencing SMPTE synchro-
nization problems. If unable to lock onto an incoming SMPTE
signal from this dialog box, you should check your SMPTE con-
nections and SMPTE source.

Help

About
The usual information: What the program is, what version, who
wrote it, copyright notice, etc...
37