Patchbay Setup; Menus; File - M-Audio Portman 4x4 Manual

Change these numbers to match your desired user bits settings.
The <Tab> key will move you to the next field.

Patchbay Setup

From this screen, you can set up all of your patchbay programs to
be stored inside the PORTMAN. Just choose a program number
by clicking on the up/down arrows and then click in the boxes to
setup the signal routing. When you click on "OK", the program
will store that program in the PORTMAN. The default settings are
all inputs merged to all outputs.
Insert Fig. RCPatch

Menus

Following are brief explanations of the program menu choices.

File

Load Config
Retrieve a previously saved SMPTE configuration. If the "Save
current configuration before loading new one" box is checked, the
current configuration file will be automatically overwritten with
the current settings. If the "Save current configuration before
loading new one" box is not checked, you can lose your current
configuration if you haven't previously saved it. Be careful.
Insert Fig. Config
Save Config
Save the currently active SMPTE configuration. All aspects of the
SMPTE settings (start time, user bits, etc...) are saved with the
configuration file.
36