La Crosse Technology WS-7213U Instruction Manual page 43

6.
In sequential order, install batteries
(follow the same battery installation
procedures seen in section I. A) of the
Detailed Set-Up Guide).
7.
Install batteries into the Indoor
Temperature Station.
8.
Follow the Detailed Set-Up Guide for
programming and operating
instructions.
D.
VIEWING AND OPERATING
WITH MULTIPLE REMOTE
CONTROL SENDER UNITS
1.
To view the temperature of a different
Remote Control Sender unit, press the
CH button. A shift from one "boxed"
number to the next should be observed
in the OUTDOOR LCD.
2.
To view the Minimum/Maximum
temperature: first select which Remote
Control Sender to read data from
(indicated by the "boxed" number).
Pressing the MIN/MAX button will
toggle through the minimum and
9