Mounting - La Crosse Technology WS-7042TWC Instruction Manual

MOUNTING

Note: To achieve a true temperature reading, avoid mounting in direct
sunlight. We recommend that you mount the remote temperature sensor on
5. Install batteries into the indoor weather station.
6. Follow the Detailed Set-Up Guide for programming and
operating instructions.
B. Viewing and Operating Multiple Remote Sensors
To view the temperature of a different remote sensor unit, press
and release the "CH" button. An arrow over one of the numbers
at the bottom of the LCD will be seen.
To view the minimum/maximum temperature:
1. Press and release the "CH" button to select which remote
temperature sensor to read data from (indicated by the
arrow).
2. Press and release the "MIN/MAX/RESET" button.
3. The maximum recorded temperature will be displayed.
4. Press and release the "MIN/MAX/RESET" button (while
"MIN" is still displayed, otherwise press the button
twice).
5. The minimum recorded temperature will be displayed.
To reset the minimum/maximum readings
1. Select which remote sensor you wish to reset by pressing
the "CH" button.
2. Press and hold the "MIN/MAX/RESET" button for 3
seconds.
3. The records for the selected remote sensor unit will be
reset.
Note: The minimum and maximum indoor temperature values
will be reset when any of the remote temperature values
are reset.
10