Table of Contents
Advertisement
3
Putting into Operation
It first must be decided whether battery or AC (using the included adaptor) power will be used to operate the system. Both
methods allow the connection of remote temperature/humidity sensor and touch-screen weather station by cable or 433
MHz wireless signal.
Note: When putting the wireless weather station into operation it is important to first perform a complete wiring and setup
of the system in the configuration you intend to use. This serves as a test of all components for correct function before
placing and mounting them in their final destinations.
3.1
Wiring the System
AC adapter receptacle
Remote Thermo/hygro
sensor receptacle
PC/COM port
receptacle
The direct cable connection of remote temperature/humidity sensor and touch-screen weather station can be used when:
4
Advertisement
Table of Contents
