Putting Into Operation - La Crosse Technology WS-3502 Operation Manual

Symbol showing Storm-
warning alarm is On
Time section
Weather
Tendency
section
Wind direction / Wind
speed / Wind gust
Buzzer selection
key
Alarm history
selection key
Note: The presence of the "Alarm-On icon" in the section means that
the particular alarm has been enabled.
3

Putting into Operation

At first it is to decide whether battery supply or mains supply (AC/DC
mains adapter included) will be used to operate the system. Both
methods allow the connection of the Relay Transmitter and Base
Station by cable or by 433 MHz radio signal.
Note: When putting the Weather Station into operation it is important
to carry out in close proximity (e.g. on a table) a complete wiring
and set up of the system in the configuration of its prospective
use. This step will lead to test all components for correct
Alarm-On symbol
for time alarm
Pressure
section
Alarm-On symbol
for pressure
Backlight section
key
29
Date section
Pressure
History section
Alarm-On symbol for wind
speed/ gust/ wind direction
Text Display
(Set up Display)