El Backlight; Buzzer; Alarm - La Crosse Technology WS-3510 Quick Operation Manual

Touch-screen weather station
Table of Contents

Advertisement

Proceed with ‫٭‬ON/OFF‫.٭‬
Activate or deactivate the alarm with ‫٭‬ON‫ ٭‬or ‫٭‬OFF‫.٭‬
Terminate with ‫٭‬EXIT‫.٭‬
Note:
Activation or deactivation of the alarm (Display or deletion of the (((•))) symbol) only pertains to the presently displayed
value.
End of Example
Note:
Twice touching the PRESSURE section toggles the displays of the Relative (rel) and Absolute (abs) air pressure.
All setting and display facilities only pertain to the presently displayed value.
10
Additional Information and Functions - Outdoor Temperature (Outdoor Temp)
Note:
By twice touching the OUTDOOR section the display will toggle between the following:
Outdoor Temperature (Outdoor Temp)
Dew Point
All setting and display facilities only pertain to the presently displayed value.
11
Operating and Setting the EL Backlight (Light), Buzzer and Alarm Sections
11.1
EL Backlight (Light)
For easier reading of the LCD the EL backlight can be switched ON or OFF by once touching the LIGHT section. When
the display shows "ON" the backlight will be switched on for approximately 15 seconds every time any one of the LCD
sections has been touched.
The switching condition (Enabled/Disabled) is shown in the text section for about 30 seconds.
Note:
When the touch-screen weather station is battery operated the repeated use of the EL backlight will result in a
considerable decrease of battery lifetime. It is recommended to either operate the touch-screen weather station with the
included AC adapter or entirely deactivate the EL backlight (see above).
11.2

Buzzer

The buzzer for acknowledgement of selecting a field or alarm signals of the touch-screen weather station can be switched
ON or OFF by touching the BUZZER section.
The switching condition ON or OFF is displayed directly in the BUZZER section as well as for about 30 seconds in the text
section (Enabled/Disabled).
11.3

Alarm

Upon touching the ALARM section, and then by pressing the ‫٭‬NEXT‫ ٭‬field all those set and activated alarms (outside the
wake-up alarm) will be displayed that have reached an alarm condition since their last deletion.
12

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ws-3512

Table of Contents