La Crosse Technology WS-3510 Quick Operation Manual page 15

Indoor Humidity (Indoor Humidity)
•
Outdoor Temperature (Outdoor Temp), Dew Point
•
Outdoor Humidity (Outdoor Humidity)
•
Important Note!
Since the operating procedures and settings are similar for all steps to be carried out on the touch-screen
weather station for the above functions, the procedure shall be explained only once by means of the following
example "Air Pressure".
9.1 Air Pressure (Pressure)
Example for Activating the Displays of Stored Maximum Values
Call up the menu on the text section by touching the PRESSURE section.
Start with ‫٭‬MAX‫ ٭‬in the menu section.
Note: Display of the stored minimum values is possible from here through the ‫٭‬MIN‫ ٭‬field on the LCD.
Display of stored value. Proceed with ‫٭‬MAX PRESSURE‫.٭‬
You may now reset the displayed value to the present value with ‫٭‬CONFIRM‫ ,٭‬if there is no need to reset, advance with
the ‫٭‬EXIT‫ ٭‬field.
End of Example
Example for Setting of Alarms by means of the HI Alarms
As in the example above here too call up the menu on the text section by touching the PRESSURE section.
Start with ‫٭‬ALARM‫ ٭‬in the menu section.
Proceed with ‫٭‬HI AL‫ ٭‬in the menu section.
Note: Setting of the LO alarms is possible from here through the ‫٭‬LO AL‫ ٭‬field.
Set the high alarm value with ‫٭‬UP‫ ٭‬or ‫٭‬DOWN‫.٭‬
11