temperature and humidity should then be
displayed on the Temperature Station. If
this does not happen after 2 minutes, the
batteries will need to be removed from
both units and reset from step 1 and the
signal reception icon is no longer shown.
A.
REMOTE TEMPERATURE SENSOR
a.
b.
c.
d.
B.
INDOOR TEMPERATURE STATION
Note: After the batteries are installed, DO
NOT press any buttons. This may interfere
with the signals, causing temperatures to
register incorrectly.
Remove the
mounting
bracket.
Remove battery
cover
Observing the
correct polarity,
install 2 AA
batteries—make
sure they do not spring free, or
start-up problems may occur.
Replace cover.
Battery
cover
9