La Crosse Technology WS-9117U-IT Instruction Manual page 16

received. If this is not happen, user shall
restart the setting up from step 1.
NOTE: You must insert the batteries into the
third sensor within 45 seconds of reception of
the second sensor.
IMPORTANT: Transmission problems will
arise if the setting for multiple sensors is not
followed as described above. Should
transmission problems occur, it is necessary
to remove the batteries from all units and start
again the set-up from
step 1.
VIEWING AND OPERATING WITH
MULTIPLE REMOTE TEMPERATURE
SENSOR UNITS
1. To view the temperature of a different
remote temperature sensor unit, press
and release the "SET/CH" button. A shift
from one "boxed" number to the next
should be observed in the OUTDOOR
LCD.
2. To view the Minimum/Maximum
temperature: first select from which
remote temperature sensor to read data
(indicated by the "boxed" number).
Pressing and releasing the "MIN/MAX"
16