La Crosse Technology WS-9117U-IT Instruction Manual page 18

c. Reattach the temperature sensor to the
mounting bracket.
2. THE TEMPERATURE STATION
a. The indoor temperature station comes
with the table stand already mounted. If
you wish to use the table-stand, all that
is required is to place the indoor
temperature station in an appropriate
location.
b. To wall mount, remove the table stand.
To do this, pull down on the stand from
the rear and rotate forward. Fix a screw
(not included) into the desired wall, and
place the indoor temperature station
onto the screw using the hanging hole
on the backside.
c. Gently pull the indoor temperature
station down to lock the screw into place.
To wall mount:
a. Remove the mounting
bracket from the
temperature sensor.
b. Mount using either
screws or adhesive
tape.
18