Weather Alarm Operations - La Crosse Technology WS-1611T Operation Manual

4. Press the + or MIN/MAX key to set the minute of the alarm time. Press the
ALARM key to confirm. Wait for about 30 seconds and the display will return to
normal display mode automatically.
5. In the normal display mode, press the ALARM once key to go to the time alarm
setting mode again. Then press shortly the SET key to switch on or off the time
alarm. (The showing of the icon (((y))) means that the time alarm is switched on.)
6. Press the HISTORY key or wait for about 30 seconds and the display will return
to normal display mode automatically.
Note:
The alarm ringing duration is 2 minutes. To stop the alarm, press any key during the
alarm ringing.

WEATHER ALARM OPERATIONS

The weather alarms can be set when certain weather conditions are met according to
your requirements. For example, you can set the thresholds for the outdoor
temperature to +104°F (high) and 14°F (low), while only enabling the high alarm and
disabling the low alarm (i.e. temperatures <14°F won't trigger alarm, but temperatures
>+104°F will).
Outdoor temp
Alarm-On icon
The Weather Center can be set to alert when a specific weather condition is reached.
The following Weather Alarm settings can be adjusted in the ALARM setting
mode.
x
High outdoor temperature alarm
x
Low outdoor temperature alarm
x
High outdoor humidity alarm
x
Low outdoor humidity alarm
x
High wind speed alarm
26
High wind
speed Alarm-
On icon
Outdoor humidity
Alarm-On icon
27