Task; Task Rebuild {Array_Id} {Once|Daily|Weekly|Monthly} {Day} {Interval} Time=Mm/Dd/Yyyy, Mm/Dd/Yyyy, Hh:mm:ss - HighPoint RAID Management Interface Manual

HighPoint CLI Reference
long as you have the appropriate privileges, you can add new tasks, and
modify or delete existing tasks.
Syntax

task

task rebuild {array_id} {name=} {once|daily|monthly|weekly}={day}
interval={interval} start=mm/dd/yyyy end=mm/dd/yyyy time=hh:mm:ss
task verify {array_id} {name=} {once|daily|monthly|weekly}={day}
interval={interval} start=mm/dd/yyyy end=mm/dd/yyyy time=hh:mm:ss
task smart {device_id} {m|h} {interval}
task delete {task_id}
task enable {task_id}
task disable {task_id}
task
This command displays detailed information about all scheduled tasks.
Example
HighPoint CLI> task
This command displays the current background tasks.
ID Task Description
1 Rebuild Array_1(created by RAID) 10/08/2004 --/--/---- 10:20:30 E
task rebuild
interval={interval}
time=hh:mm:ss
This command allows you to schedule the frequency by once, daily, weekly
or monthly and the detailed time range to rebuild a specified array. The first
mm/dd/yyyy
the task end date.
Note:
When you add a task to rebuild a selected array
should be omitted
{array_id}
start=mm/dd/yyyy
specifies the task start date, while the second
.
Start-Date End-Date
{once|daily|weekly|monthly}={day}
, the parameter
once
Time
end=mm/dd/yyyy
specifies
mm/dd/yyyy
{day}
- 18 -
S