Create Command - HighPoint RAID Management Interface Manual

HighPoint CLI Reference
Example
HighPoint CLI> query arrays 1
Typical output:
HighPoint CLI>query arrays 1
ID:
Type:
Capacity(GB):
SectorSize:
Progress:
ID Capacity
---------------------------------------------------------------------
1/5/1 249.98
1/6/1 249.98
1/7/1 249.98
1/8/1 249.98
---------------------------------------------------------------------

Create Command

This command allows you to create a new RAID array, or add a spare disk,
or expand/migrate an existing array.
Syntax
create {RAID0|RAID1|RAID10|RAID3|RAID5|RAID6|RAID50|JBOD|spare}
[create-options]
Parameters
You can specify one or more create options for this command, separated by
space. The options can be typed in any order.
disks=
init=
name=
1 Name:
RAID5
50.00
512B
--
MaxFree Flag
223.31 NORMAL RAID
223.31 NORMAL RAID
233.31 NORMAL RAID
233.31 NORMAL RAID
specifies member disks which will compose a new array, e.g.
disks=1/1,1/2, disks=*. The character * means all available
drives.
specifies initialization option (foreground or background). The
default option is create-only. The create-only option is
applicable for all the RAID types, which is to create an array
without any initialization process. Initialization is needed for
redundant arrays to provide data redundancy.
specifies the name for the array being created.
MY_RAID5
Status: NORMAL
BlockSize: 128k
CachePolicy: --
Status ModelNumber
WDC WD2500JD-00HBB0
WDC WD2500JD-00GBB0
WDC WD2500JD-00HBB0
WDC WD2500JD-00GBB0
- 8 -