Mail Commands; Mail Recipient; Mail Recipient Add {Recipient_Name}{Mail_Address} [Inf|War|Err] - HighPoint RAID Management Interface Manual

HighPoint CLI Reference
HighPoint CLI> events save /tmp/raidlog.txt
This command will save all the events to /tmp/

Mail Commands

Syntax

mail recipient

mail recipient add {recipient_name}{mail_address} [Inf|War|Err]

mail recipient delete {recipient_name}
mail recipient test {recipient_name}
mail recipient set {recipient_name}{Inf|War|Err}
mail server
mail server set {server_address}{port} { status } {from_address}
[username] [password]
mail server set {a|p|s|m|u|t} {value}
mail recipient
--- List all the mail recipients
Example
HighPoint CLI> mail recipient
Typical output:
ID Name
1 RAID
2 Kate
Mail recipient add {recipient_name} {mail_address} [Inf|War|Err]
--- Add a not exist recipient
Example
HighPoint CLI> mail recipient add admin admin@somecompany.com Inf War Err
This command will setup the RAID system to send mail to
admin@somecompany.com
Mail Address
admin@somecompany.com
kate@somecompany.com
about all logged events.
raidlog.txt.
Notify Types
Information, Warning, Error.
Warning, Error.
- 15 -