Foot Switch - Zoom Hyper Lead HL-01 Operation Manual

1
GAIN control
This control adjusts the distortion gain. Turning it
clockwise increases the distortion intensity.
2 TREBLE control
This control adjusts the high frequency range.
Turning the control clockwise makes the sound
brighter and sharper.
3
MIDDLE control
This control adjusts the middle frequency range.
Turning the control emphasizes or attenuates the
range selected with the RANGE control (
4 RANGE control
Adjusts the turnover frequency for the MIDDLE
3
control ( ).
5
BASS control
This control adjusts the low frequency range.
Turning the control clockwise makes the sound more
solid and heavy.
6 LEVEL control
This control adjusts the output signal level. Turning
the control clockwise increases the volume.
7 IN jack
This is the input of the unit and it also acts as a
power switch. When you connect the plug of the
cable from the guitar, the unit is turned on.
8
OUT jack
This is the output of the unit. Connect the plug of the
cable going to the guitar amplifier or other effect
device here.
9
AC adapter jack
When powering the unit from the AC adapter, insert
the plug from the adapter into this jack. Be sure to
use only the dedicated AC adapter for the unit
(Zoom AD-0006). When the AC adapter is
4
).
connected, the HL-01 will always be ON, regardless
of whether a cable is plugged into the IN jack.
10
Indicator
Lights up when the HL-01 effect is active. When the
remaining battery capacity is getting low, indicator
brightness decreases.
11

Foot switch

Switches the HL-01 effect on and off.
12
Battery compartment
A 9V battery (6F22) can be inserted here.
HL-01
ZOOM Hyper Lead
5