Connection Examples With Multi-Effects - Zoom Hyper Lead HL-01 Operation Manual

Connection Examples With Multi-Effects

This section shows how to use the HL-01 together with multi-effect devices such as the ZOOM
GFX-4 or GFX-8.
I
Connecting HL-01 before multi-effect device
I
Using send/return loop of multi-effect
SEND
RETURN
In this example, the
connection sequence is HL-01
¡ multi-effect ¡ amplifier.
Distortion is produced by the
HL-01, and distortion effects
of the multi-effect device are
bypassed.
By connecting the HL-01 in
the send/return loop of a
multi-effect device such as the
ZOOM GFX-8, the HL-01 can
be used as if it were a part of
the other device. You can
switch the HL-01 on and off
using patch programs of the
multi-effect.
HL-01
ZOOM Hyper Lead
11