Safety Precautions - Zoom Hyper Lead HL-01 Operation Manual

Safety Precautions

In this manual, symbols are used to highlight warnings and cautions for you to
read so that accidents can be prevented. The meanings of these symbols are as
follows:
This symbol indicates explanations about extremely
dangerous matters. If users ignore this symbol and handle the
Warning
device the wrong way, serious injury or death could result.
This symbol indicates explanations about dangerous matters.
If users ignore this symbol and handle the device the wrong
Caution
way, bodily injury and damage to the equipment could result.
Please observe the following safety tips and precautions to ensure hazard-free
use of the HL-01.
About power
• Since power consumption of this unit is fairly high, we recommend
the use of an AC adapter whenever possible. When powering the unit
Warning
from a battery, use only an alkaline type.
AC adapter operation
• Be sure to use only an AC adapter which supplies 9 V DC, 300 mA
and is equipped with a "center minus" plug (Zoom AD-0006). The
use of an adapter other than the specified type may damage the unit
and pose a safety hazard.
• Connect the AC adapter only to an AC outlet that supplies the rated
voltage required by the adapter.
• When disconnecting the AC adapter from the AC outlet, always
grasp the adapter itself and do not pull at the cable.
• If the unit is not to be used for a long time, disconnect the AC
adapter from the outlet.
Battery operation
• Use a generic 9V dry battery (6F22) (alkaline or manganese).
• The HL-01 cannot be used for recharging.
• Pay close attention to the labeling of the battery to make sure you
choose the correct type.
• If the HL-01 is not to be used for an extended period of time, remove
16
ZOOM Hyper Lead
HL-01
the battery from the unit.
• If batteries leakage has occurred, wipe the battery compartment and
the battery terminals carefully to remove all remnants of battery
fluid.
• While using the unit, the battery compartment cover should be
closed.
Environment
Avoid using your HL-01 in environments where it will be exposed to:
• Extreme temperature
Caution
• High humidity or moisture
• Excessive dust or sand
• Excessive vibration or shock
Handling
• Since the HL-01 is a precision electronic device, avoid applying
excessive force to the controls. Do not operate the keys or controls
Caution
with your foot.
• Make sure that no foreign objects (coins or pins etc.) or liquids can
enter the unit.
• Be sure to turn the power to all equipment off before making
connections.
• Before moving the unit, turn the power off, and disconnect all cables
and the AC adapter.
Alterations
Never open the case of the HL-01 or attempt to modify the product in
any way since this can result in damage to the unit.
Caution
ZOOM CORPORATION
NOAH Bldg., 2-10-2, Miyanishi-cho, Fuchu-shi, Tokyo 183-0022, Japan
PHONE: +81-42-369-7116 FAX: +81-42-369-7115
Web Site: http://www.zoom.co.jp
Printed in Japan HL-01-5000-2