Reducing Noise (Lo Cut); Monitoring The Input Signal - Zoom H2next Operation Manual

Reducing noise (LO CUT)

The recorder can be set to reduce the sound of wind, vocal pops and other
noise.
1.
Press .
2.
Use to select INPUT, and then
press .
3.
Use to select LO CUT, and then
press .
4.
Use to select ON, and then press
66
.

Monitoring the input signal

You can listen to the input signal level through headphones.
1.
Press .
2.
Use to select INPUT, and then
press .
3.
Use to select MONITOR, and then
press .
4.
Use to select when monitoring is
enabled, and then press
Setting
HOME AND REC Monitoring enabled when home screen open and
when recording
ALWAYS ON Monitoring always enabled
ALWAYS OFF Monitoring disabled
H2n
Handy Recorder
.
Explanation
67