The Process Of Disassembling - Daewoo DWF-200TATC Service Manual

The Process Of Disassembling

No.
1
Release screws marked 4-point
2
3
4
Process
Remove the protector
Remove the v-belt
Loosen the fastening nut
Disassemble the spring washer
Disassembling 1
Notice
Use wrench or driver
- ratchet handle
- extension bar
- socket : 10mm
Use fixing jig for pulley as to
see fig 1.
and 17mm-socket for nut
Take out plain washer if it has
THE REPAIR
17