Lint Filter; Residual Time Display; Drain Motor - Daewoo DWF-200TATC Service Manual

Lint Filter

Much lint may be obtained according to the kind of clothes to
be washed and some of the lint may also stick to the clothes.
To minimize this possibility a lint filter is provided on the upper
part of the tub to filter the wash water as it is discharged from
the water channel. It is good to use the lint filter during
washing.
HOW TO REPLACE LINT FILTER
1 Pull the filter frame upward.
2 Turn the lint filter inside out, and wash the lint off with water.
3 Return the filter as it was, and fix the filter frame to the slot.

Residual Time Display

When the START/HOLD button is pressed, the residual time (min.) is displayed on the time indicator, and it will be
counted down according to process.
When operation is finished, the TIME INDICATOR will light up

Drain Motor

STRUCTURE
Pull
Loosen
FUNCTIONAL PRINCIPLE
1 When the DRAIN MOTOR connected to the power source, the DRAIN MOTOR rotates with 900 r.p.m and revolves
the pulley by gear assembly for reducing.
2 When the pulley is rotated, the pulley winds the wire to open the drain valve.
3 Therefore, rotation of pulley changed to the linear moving of wire.
4 The wire pulls the brake lever of Gear Mechanism Ass'y within 5 seconds.
5 After the wire pulled, gear assembly is separated from motor and condition of pulling is held by operation of the
lever.
6 When the power is turned off, the drain valve is closed because the wire returns to original position.
10 FEATURE
.
Pulley
Lever
Inductive ring
Magnet
Coil of motor
Magnet of motor