Operation Of Hands-Free Phoning; Connecting A Bluetooth Device - Kenwood DPX404U Instruction Manual

Function of DPX504U with KCA-BT200/BT300 (Optional Accessory)

Operation of hands-free phoning

SRC
4 ¢
LOG
Connecting a Bluetooth Device
Before use the Bluetooth device, you need to
connect Bluetooth device to this unit. The following
3 steps procedure is necessary.
Step 1. P airing (Registering from Bluetooth
devices)
To make your Bluetooth device (cell-phone) usable
with this unit, you need to register it (pairing).
1
Turn on this unit
Press the [SRC] button.
2
Start registering a this unit by operating the
Bluetooth device
By operating the Bluetooth device, register the
hands-free unit (pairing). Select "KCA-BT200"/ "KCA-
BT300" from the list of connected units.
3
Enter a PIN code
Input the PIN code ("0000") in the Bluetooth
device.
Check that registration is complete on the
Bluetooth device.
✍ PIN code is set to "0000" as the default. You can
change this code. Refer to
Code> (page 65).
4
By operating the Bluetooth device, start hands-
free connection.
Step 2. C onnection
If you have registered 2 or more cell-phones, you
need to select one of them. For more details,
see <Selecting the Bluetooth device You Wish to
Connect> (page 65).
When a cell-phone is connected, the "BT" indicator
is light up.
Step 3. H ands-free phoning
You can do hand-free phoning when the
connection is made.
28
|
DPX504U/ DPX404U/ DPX304
1 – 6
DISP
ATT
VOL
<Registering PIN
⁄
•
When registering from this unit, refer to
Bluetooth device> (page 64).
<Registering