Playing Bow, Bell, And Edge (3-Way Triggering); Naming A Trigger Bank [F5 (Name)] - Roland TD-12 Owner's Manual

Chapter 5. Trigger Settings [TRIGGER]
Playing Bow, Bell, and Edge
(3-Way Triggering)
When using the CY-15R or CY-12R/C for the RIDE, you can
three way triggering (bow, bell, and edge shot) performance
are possible.
3Way Trigger: OFF, ON
Connect as shown below, set 3Way Trigger to "ON."
fig.05-Ride.e
BOW/BELL
BOW/EDGE
Correspondences Between Playing
Method and Trigger Input
Playing Method TD-12 TRIGGER INPUT
Bow Shot 9 RIDE head
Bell Shot 9 RIDE rim
Edge Shot 10 EDGE rim
* Head-side tone for the TRIGGER INPUT 10 EDGE cannot be
sounded.
* When 3Way Trigger is set to "ON," "RD CTRL" is displayed
for the trigger type for TRIGGER INPUT 10 EDGE. It cannot
be changed.
52
Ride
CY-15R or CY-12R/C
TD-12 Rear Panel
EDGE
RIDE

Naming a Trigger Bank [F5 (Name)]

Each trigger bank can be named (up to 12 characters).
fig.05-BankName_70
1. In the "TRIGGER BANK" screen, select the
trigger bank you want to name.
2. [F5 (ADVANCE)] - [F5 (NAME)].
The "TRIGGER BANK NAME" screen appears.
3. [CURSOR (left/right)] to move the cursor to the
character to be changed.
4. Use [VALUE], [+/-], or [CURSOR (up/down)] to
change the character.
Function Buttons
[F1 (INSERT)]
A blank space is inserted at the cursor position.
[F2 (DELETE)]
Character at the cursor position is deleted.
[F3 (SPACE)]
Character at the cursor position is replaced by a blank
space.
[F4 (CHAR)]
Character at the cursor position changes between
uppercase/lowercase alphabet, or numbers and symbols.
5. When finished, Press [EXIT].