Jeep Grand Cherokee Owner's Manual page 214

212 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Pressing the SET (+) button once will result in a 1 mph
(1 km/h) increase in set speed. Each subsequent tap of
the button results in an increase of 1 mph (1 km/h).
While the Normal (Fixed Speed) Cruise Control is set,
you can increase the set speed by pressing and holding
the SET + button. If the button is continually pressed, the
set speed will continue to increase in 5 mph (10 km/h)
increments until the button is released. The increase in set
speed is reflected in the EVIC display.
To decrease speed while the Normal (Fixed Speed) Cruise
Control is set, push the SET (-) button. If the button is
continually held in the SET (-) position, the set speed will
continue to decrease until the button is released. Release
the button when the desired speed is reached, and the
new set speed will be established.
Pressing the SET (-) button once will result in a 1 mph
(1 km/h) decrease in set speed. Each subsequent tap of
the button results in a decrease of 1 mph (1 km/h).
While the Normal (Fixed Speed) Cruise Control is set, the
set speed can be decreased by pressing and holding the
SET - button. If the button is continually pressed, the set
speed will continue to decrease in 5 mph (10 km/h)
increments until the button is released. The decrease in
set speed is reflected in the EVIC display.
To Cancel
The following conditions will cancel the Normal (Fixed
Speed) Cruise Control without clearing the memory:
• You softly tap or depress the brake pedal.
• You press the CANCEL button.
• The Electronic Stability Control/Traction Control Sys-
tem (ESC/TCS) activates.