Winding The Bobbin - Janome Sewing Machine Instruction Book

Winding the Bobbin

Horizontal Spool Pin
Ordinary Spool
Small Spool
Lift up the spool pin. Place the spool of thread on the spool with the
thread coming off the spool as shown.
Attach the large spool holder pressing it firmly against the thread spool.
* The small spool holder is used with narrow or small thread spools.
Additional Spool Pin
The additional spool pin is used
to wind extra bobbins without
unthreading the machine.
To use, insert the additional
spool pin in the hole. Place the
felt and the spool on the pin.
Removing the Bobbin
Gently slide the hook cover plate
release button to the right, and
remove the cover plate.
Lift out the bobbin.