Using Irobot Looj - iRobot Looj 330 Owner's Manual

Using iRobot
IMPORTANT: The robot is only intended to clean in the forward
direction. Always have the auger spinning when moving the robot.
Tip: Learn about Looj on the ground first, not on a ladder.
1. Drive it forward and backward on the ground. Verify that the lights on the
remote control handle and on the robot blink when buttons are pressed.
2. Spin the auger in both directions.
Read about and practice operating all the buttons and controls before use.
For more information on the light indicators and functions of the button
controls, see the tables on page 22. Practice attaching and detaching the
handle as described on page 12.
using Looj
1. The optimum spot for ladder
placement is away from wires,
hazards, on flat ground, etc.
Read and follow ladder instructions
provided by the ladder manufacturer
before using a ladder. See
"Important Safety Instructions"
section for more details.
2. Attach belt clip to belt and attach Looj to the belt clip.
3. Climb the ladder.
4. R emove debris from one end of the gutter to clear a space
for the Looj. Place Looj in gutter. Remove debris from gutter
directly in front of ladder. Otherwise, you may be sprayed by
debris when Looj begins to operate.
CAuTION: Always keep both feet and one hand on the ladder.
®
Looj
®
www.irobot.com
17