Attaching The Looj Belt Clip - iRobot Looj 330 Owner's Manual

Attaching the Looj Belt Clip
The Looj belt clip is designed to hold Looj while you climb up and down the
ladder. Always use the belt clip when using Looj on a ladder.
Hook the belt clip over your belt where Looj will be secure and easy to reach.
Attach the robot to the robot hook.
5 4
belt Clip
5 4
CAuTION: Always keep the belt clip on the side of your body. Placing
the robot in the front may cause it to be kicked by your leg and fall off.
CAuTION: Never use Looj on a ladder without the belt clip to hold
the robot while you ascend or descend.
iRobot Looj 300 Series Owner's Manual
16
3 2 1
Robot Hook
63 South Ave
Burlington, MA 01803
(781) 345-0200
www.irobot.com
THIRD ANGLE PROJECTION
THIS PRINT IS THE PROPERTY OF
iROBOT. THE INFORMATION
DO NOT SCALE PRINT | DIMENSIONS IN:
CONTAINED THEREON MAY NOT BE
USED, OR THE PRINT REPRODUCED PRODUCT NAME:
WITHOUT WRITTEN PERMISSION FROM
PART NUMBER:
iROBOT. ALL REPRODUCTIONS, IN
WHOLE OR IN PART, MUST BEAR THIS
STATEMENT OR MAKE REFERENCE TO IT.
NAME:
SIZE: SCALE: LIFECYCLE:
C
0,50 :1
3 2 1
F
E
D
C
B
®
A
REV:
SHEET:
9 OF 21