Charging And Installing The Battery - iRobot Looj 330 Owner's Manual

Charging and Installing the Battery
Looj ships with a Lithium-Ion battery.
Be sure to fully charge the battery before first use. Fully charging the
battery before every use will provide best performance.
Looj batteries are designed to power Looj through up to 200 linear feet
of gutter on a single charge.
Between uses and for long term storage, remove the battery from the robot,
and store in a cool, dry place.
Always use the correct line cord and plug that work with your type of
electrical outlet.
To install battery:
1. Slide the battery door latch and
open the door.
2. Holding the battery by the finger
holds on the end, label side up,
slide the battery into the battery
compartment attached to the
battery door.
3. If dirty, wipe battery compart-
ment door clean to ensure a
proper seal.
4. C lose door until it clicks.
battery Tips
• Remove all batteries from the robot and store in a cool, dry place after
each use.
• See www.irobot.com/support for more details on Looj batteries
and charging.
• Store at temperature range 5 to 25°C (40 to 80 °F).
CAuTION: In case of any battery issues always contact iRobot
Customer Care first. For return purposes never ship Li-ion batteries
via air freight. Always ship ground. Always place the battery in its own
resealable bag to protect from battery shortage during ground shipping.
CAuTION: do not get
water inside the robot.
Battery
Label
www.irobot.com
Battery
Door
Latch
11