Loading The Racks; Lower Rack; Cutlery Basket; Upper Rack - Indesit DIS 04 Operating Instructions Manual

Loading the racks

Before loading the racks, remove all food residues from
EN
the crockery and empty liquids from glasses and cups.
Arrange the crockery so that it is held in place firmly and
does not tip over.
After loading the appliance, check that the sprayer arms can
rotate freely.

Lower rack

The lower rack can hold pans, lids, plates, salad bowls, cutlery,
etc. as seen in the Loading examples.
Plates and large covers should be placed at the sides of the
rack, ensuring that they do not block the rotation of the upper
sprayer arm.

Cutlery basket

The type of cutlery basket may vary according to the dishwasher
model: The cutlery basket should be positioned at the front of the
lower rack, by sliding it between the fixed inserts, or on the
upper rack when the half load option has been selected (in models
featuring this option).
Knives and other utensils with sharp edges must be placed
in the cutlery basket with the points facing downwards, or they
must be positioned horizontally in the tip-up compartments on
the upper rack.
Cutlery basket positioning examples
ù

Upper rack

Load this rack with delicate and lightweight crockery: glasses,
tea and coffee cups, saucers, small salad bowls, saucepans
and small saucepans which are not too soiled, using the Loading
examples as a guide.
• Mugs and cups, long sharp knives and serving utensils: place
these on the tip-up compartments
*
Only available in selected models.
**
The number and position may vary.
6
Some dishwasher models are fitted with
*
tip-up sections , which can be used in
a vertical position when arranging plates
or in a horizontal position when
arranging pans and salad bowls.
- It has a collapsible sliding
system which means the
cutlery can be arranged
in the best possible way.
**
.
Adjusting the height of the upper rack
In order to make it easier to arrange the crockery, the upper rack
may be moved to a higher or lower level.
The height of the upper rack should ideally be adjusted
WHEN THE RACK IS EMPTY.
Never lift or lower the rack on one side only.
Open the left and right guide rail stops
and pull out the rack; position it higher
or lower as required, slide it along the
guide rails until the front wheels are in
place and close the stops ( see figure ).
If the rack is fitted with "Dual Space"
handles
rack until it reaches its stop point, grip
the handles at the sides of the rack and
move it upwards or downwards, then
slowly let it fall back into place.
Loading examples for the upper rack
Loading examples for the upper rack
Items which should not be washed in the
dishwasher
• Wooden items, objects with wooden or horn handles or glued-
on parts.
• Items made from aluminium, copper, brass, pewter or tin.
• Items made from plastic material which is not heat-resistant.
• Antique or hand-painted porcelain.
• Antique silver. Silver which is not antique may, however, be
washed in the dishwasher using a delicate wash cycle,
provided that it does not come into contact with other metals.
We recommend the use of crockery which is dishwasher
safe.
*
( see figure ), pull out the upper