Set Mode; I Set Mode Programming - Icom IC-M401EURO Instruction Manual

Vhf marine transceiver

Hide thumbs Also See for IC-M401EURO:

Table of Contents

SET MODE

Set mode is used to change the conditions of some of the

transceiver's functions.

NOTE: Available functions may differ depending on dealer

setting.

• SET MODE CONSTRUCTION

Scan mode

Scan resume timer

Push

LCD contrast

Entering set mode

q Turn power OFF.

w While pushing [16], turn power ON to enter set mode.

e After the display appears, release [16].

r Push [16] to select the desired item, if necessary.

t Push [Y]/[Z] to select the desired condition of the item.

y Turn power OFF, then ON again to exit set mode.

Dual/tri watch

Beep tone

Table of Contents