Hunter 44110 Installation And Operation Manual page 37

methoDs of operation, cont.
3. Press or
Up
the hour and adjust the minute setting.
4. Press or
Up
save the minute setting and adjust the temperature.
5. Press or
Up
again to move to the next program number.
(There are 4 programs per day. If you do not wish to assign 4 programs per
day, set up to 4, keeping in mind that the total program time must equal 24
hours.)
6. Repeat steps 2-5 for the remaining days.
7. To review your program settings, press
to review the customized programs.
(You can make changes at any time when the thermostat is in Program
mode.)
8. Slide the
system selector
repeat steps 2-5.
to change the hour. Press
Down
to change the minute. Press
Down
to change the temperature. Press
Down
Program
switch to the opposite position and
7
to save
Program
to
Program
Program
repeatedly