Table of Contents
Advertisement
1–2. Switching off the copier
Clear/Stop
C
1–3. Stand-by Mode
After copy operation, all indicators except the Stand-by indicator can be turned
off. This is the Stand-by mode.
Stand-by
Clear Modes
C
1. If copying is under way, wait until it
finishes or press the Clear/Stop key
to cancel copying.
Turning off the copier during copying
may cause a paper misfeed or machine
failure.
2. Turn off the main switch.
Leave the copier plugged in if you use
it often. Unplugging the copier disables
the
anti-condensation
might reduce machine efficiency.
Press the Stand-by/Clear Modes
key until the Stand-by/Clear Modes
key indicator lights. Only the Stand-
by indicator remains on.
To return to the ready condition,
press the Stand-by/Clear Modes
key. The machine becomes ready
for copying.
2
heaters.
This
Advertisement
Table of Contents
