Supported Models (Pcl6 Driver For Universal Print V3.13.0.0) - Ricoh PCL6 Driver Technical Information

PCL6 Driver for Universal Print ver 4.0.0
Printing using Citrix UPD is not supported officially because the Citrix UPD is not a driver
created by Ricoh. The Citrix UPD uses EMF data. EMF data can cause a variety of errors,
depending on the application used to print. In addition, if a Citrix client has drivers that were
installed via point and print, changes made to the Citrix UPD settings might not take effect.
Not using a print server:
Using the printer driver installed on the client: Auto-Create Printer (Citrix UPD)
•
Using a print server:
Using the client's printer driver that is being shared from a print server: Auto-Create
•
Printer (Citrix UPD)
Known issues and Limitation:
The Citrix replication function, which replicates driver files on another server, is not
•
supported. Please manually install the printer driver on each server.
• Device Option Utility is not supported for use with any version of the PCL6 Driver for
Universal Print
Some driver settings from the client PC may not be inherited by the auto-created printer
•
(such as Job Type settings, paper size, output tray, etc.). This primarily occurs when the
Citrix server is x64 and the client is x86 or vice-versa.

1-6 Supported Models (PCL6 Driver for Universal Print v3.13.0.0)

The PCL6 Driver for Universal Print supports not only "Model Specific" mode but also "Generic
Model" mode. Supported models are dependent on each mode. For details about "Generic Model"
mode, please see the section "9-1. 'Generic Model' mode".
MFPs Aficio 2051/2060/2075
Aficio 3025/3030
Aficio 3035/3045
Aficio 3224C/3232C
Aficio 3228C/3235C/3245C
Aficio 3260C, Aficio Color 5560(V)
Aficio MP 161/161L
Aficio MP 1600/2000
Aficio MP 171
Aficio MP 201
Aficio MP 2352/2852/3352
Aficio MP 2500/2500L
Model Specific Generic Models
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
Page 19 of 87