Configuring Disabling Automatic Bi-Directional Communication; Point & Print; Installation On A Point And Print Server - Ricoh PCL6 Driver Technical Information

PCL6 Driver for Universal Print ver 4.0.0
Note:
Even if "Automatically Update Printer Information" is unchecked, bi-directional communication
can be established manually using the "Update Now" button.
Unchecking "Automatically Update Printer Information" is not recommend if the driver is to be
used with PrinterSwitcher. Doing so could result in unexpected driver behavior and print output.

Configuring disabling automatic bi-directional communication

Uncheck "Automatically Update Printer Information" in the Accessories tab. v3.3.0.0 or later
version of PCL6 Driver for Universal Print is supported disabling.
5-3 Point & Print

5-3-1 Installation on a Point and Print server:

1. Create a PCL6 Driver for Universal Print queue with the procedure described in the
"Installation and queue creation" section above.
2. Share the printer and assign it the desired privileges.
3. Add Additional Drivers as necessary.
Page 44 of 87