Honda BF9.9A Owner's Manual page 11

4. Motor angle (cruising)
Adjust the motor so the propeller
shaft is parallel with the water
surface.
CAUSES BOAT TO
"'SQUAT"
INCORRECT
CAU%fo~~T TO
GlVES MAXlMUM
PERFORMANCE
5. Motor angle adjustment
If the propeller shaft is not parallel
with the water surface, adjust by
changing the transom angle
adjusting rod position.
There are four adjusting stages.
1. Push in (A) the adjusting rod,
twist upwards (B) and pull out to
remove.
2. Inserting the rod in the proper
hole, twist it down to lock.
pii5iq
To prevent damage to the motor or
boat, make sure the transom angle
.adjusting bolt is locked.
TRANSOM ANGLE
ADJUSTlNG ROD
TO CHANGE UNLOCKED
TO LOCK LOCKED POSmON
9