With A Tether - Honda Accord Crosstour Owner's Manual

Installing a Child Seat
Installing a Child Seat with a
Tether
TETHER ANCHORAGE POINTS
A child seat with a tether can be
installed in any seating position in
the back seat, using one of the
anchorage points shown above.
Since a tether can provide additional
security to the lap/shoulder belt
installation, we recommend using a
tether whenever one is required or
available.
46
Using an Anchor
ANCHOR COVER Outer Position
ANCHOR TETHER STRAP HOOK
EX-L models
Remove the front cargo area cover
(see page 114 ).
1. After properly securing the child
seat (see page 44 ), lift the head
restraint, then route the tether
strap over the seat-back and
through the head restraint legs.
2011 Accord Crosstour
ANCHOR ANCHOR COVER
Center Position TETHER STRAP HOOK
For the center seat, lower the
head restraint, then route the
tether strap over the head
restraint and seat-back.
2. Open the anchor cover, then
attach the tether strap hook to the
anchor, making sure the strap is
not twisted.
3. Tighten the strap according to the
seat maker's instructions.