Honda Accord Crosstour Owner's Manual page 46

Flexible type
Other LATCH-compatible seats
have a flexible-type connector as
shown above.
4. Whatever type you have, follow
the child seat maker's instructions
for adjusting or tightening the fit.
ANCHOR COVER
ANCHOR TETHER STRAP HOOK
EX-L models
Remove the front cargo area cover
(see page 114 ).
5. Lift the head restraint (see page
94 ), then route the tether strap
through the legs of the head
restraint and over the seat-back,
making sure the strap is not
twisted.
6. Open the anchor cover.
2011 Accord Crosstour
Installing a Child Seat
7. Attach the tether strap hook to the
tether anchor, then tighten the
strap as instructed by the child
seat maker.
If the tether strap is too long and
cannot be tightened firmly, find a
route where the strap can be
tightened securely.
8. Push and pull the child seat
forward and from side-to-side to
verify that it is secure.
43