Honda Accord Crosstour Owner's Manual page 353

Lights
SCREW
TAILLIGHT ASSEMBLY
Use a Phillips-head screwdriver to
2.
remove the taillight assembly
mounting screw under each cover.
3. Pull the taillight assembly out of
the body by sliding it outside.
4. Determine which of the three
bulbs is burned out: stop/taillight,
back-up light or turn signal light.
350
BULB
SOCKET
5. Remove the socket by turning it
one-quarter turn counterclockwise.
6. Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
7. Insert the socket back into the
light assembly. Turn it clockwise
to lock it in place.
2011 Accord Crosstour
8. Turn on the lights to make sure
the new bulb is working.
9. Align the clips on the taillight
assembly with the holes in the
body, then push the taillight
assembly into place. Tighten the
two mounting screws securely and
reinstall the covers.