Changing The Exhaust Direction; Using The Nose Cap - Hitachi NT 50AE2 Instruction And Safety Manual

English

CHANGING THE EXHAUST DIRECTION

● When changing the exhaust direction, be sure to remove your
finger from the trigger and disconnect the air hose from the nailer.
The direction of the exhaust vent can be changed by turning the top cover.

USING THE NOSE CAP

● When detaching or attaching the nose cap, be sure to remove
your finger from the trigger and disconnect the air hose from the
nailer.
The nose cap is attached to the push lever tip to protect the workpiece from scratches or
damage. Remove in the order shown below when not using.
1 DISCONNECT AIR HOSE FROM NAILER.
2 Pull out the nose cap in the direction of the arrow as shown in the diagram.
Attach to the tip of the push lever in the reverse order of detaching.
When not using the nose cap, attach to the storage area
in back of the magazine.
22
Exhaust vent
Firing head
Push lever
Nose cap
WARNING
Top cover
WARNING
1
Disconnect
air hose
Nose cap