Section 7: Service; Troubleshooting - Grizzly G0631 Owner's Manual

SEcTiON 7: SERvicE

review the troubleshooting and procedures in this section to fix or adjust your machine if a problem devel-
ops. if you need replacement parts or you are unsure of your repair skills, then feel free to call our technical
support at (570) 546-9663.
Motor & Electrical
symptom possible Cause
1. Fuse/breaker has blown.
machine does not
start or a fuse/ 2. switch disabling key is removed or at fault.
breaker trips.
3. motor is at fault.
4. Capacitor is at fault.
1. Fan is bent or loose.
machine has vibra-
tion or noisy opera- 2. motor or component is loose.
tion.
Operations
symptom possible Cause
downdraft table 1. dust collection drawer is full.
does not adequately
2. Filter is dirty.
collect dust; poor
performance.
-20-

Troubleshooting

possible solution
1. Correct short/replace fuse/replace breaker.
2. install/replace switch disabling key; replace switch.
3. Correct motor wiring connections or replace bad
motor.
4. replace capacitor.
1. Adjust fan balance or replace fan.
2. inspect/replace stripped or damaged bolts/nuts, and
re-tighten with thread locking fluid.
possible solution
1. Empty collection drawer (page 17).
2. Knock dust off filter. if this has no effect, replace with
new filter unit.
model g0631 (mfg. since 3/10)