Table of Contents
Advertisement
SEcTiON 6: MAiNTENANcE
Always disconnect power
to the machine before
performing maintenance.
Failure to do this may
result in serious person-
al injury.
Schedule
For optimum performance from your machine,
follow this maintenance schedule and refer to any
specific instructions given in this section.
Daily check:
•
Check filters.
•
dust drawers.
•
loose mounting bolts.
•
Worn or damaged wires.
•
Any other unsafe condition.
Weekly Maintenance:
•
Check filters.
•
dust drawers.
Monthly check:
•
Clean/vacuum dust buildup from inside cabi-
net and off motors.
cleaning
Cleaning the model g0631 is relatively easy.
vacuum excess sawdust, and wipe off the remain-
ing dust with a dry cloth. if any resin has built up,
use a resin dissolving cleaner to remove it.
model g0631 (mfg. since 3/10)
Filters
the filters may need to be serviced or replaced if
suction is noticeably reduced. the amount of use
has a direct bearing on how often you must ser-
vice or change the 1" prefilter and 2" filter.
Keep the downdraft table
unplugged
maintenance procedures.
ignoring this warning may
result in serious personal
injury to you or others!
Always wear a dust mask
and safety glasses when
servicing and changing
filters.
cause allergic reactions
or respiratory problems.
To service the filters:
1.
disConnECt
doWndrAFt tABlE!
2.
remove the two outside downdraft plates,
remove the filters, and gently knock the filters
out inside a garbage can.
Note: Generally this technique will work two
or three times, then you will have to replace
the filter.
3.
reinstall the filters and the downdraft plates.
To change a filter:
1.
disConnECt
doWndrAFt tABlE!
2.
remove the outside downdraft plates, remove
the filters, install new filters, then reinstall the
plates.
during
all
Sawdust
may
poWEr
to
thE
poWEr
to
thE
-19-
Advertisement
Table of Contents
