Section 7: Service; Troubleshooting - Grizzly G0631 Owner's Manual

SECTION 7: SERVICE

Review the troubleshooting and procedures in this section to fix or adjust your machine if a problem devel-
ops. If you need replacement parts or you are unsure of your repair skills, then feel free to call our Technical
Support at (570) 546-9663.
Motor & Electrical
Symptom Possible Cause
1. Fuse/breaker has blown.
Machine does not
start or a fuse/ 2. Switch disabling key is removed or at fault.
breaker trips.
3. Motor is at fault.
4. Capacitor is at fault.
1. Fan is bent or loose.
Machine has vibra-
tion or noisy opera- 2. Motor or component is loose.
tion.
Operations
Symptom Possible Cause
Downdraft table 1. Dust collection drawer is full.
does not adequately
2. Filter is dirty.
collect dust; poor
performance.
-20-

Troubleshooting

Possible Solution
1. Correct short/replace fuse/replace breaker.
2. Install/replace switch disabling key; replace switch.
3. Correct motor wiring connections or replace bad
motor.
4. Replace capacitor.
1. Adjust fan balance or replace fan.
2. Inspect/replace stripped or damaged bolts/nuts, and
re-tighten with thread locking fluid.
Possible Solution
1. Empty collection drawer.
2. Knock dust off filter. If this has no effect, replace with
new filter unit.
G0631 79" x 28" Downdraft Table