Integrated Peripherals - Gigabyte GA-M68M-S2P User Manual

2-6

Integrated Peripherals

On-Chip IDE Channel
NV Serial-ATA Controller
IDE Prefetch Mode
USB Memory Type
 Serial-ATA RAID Config
Onboard Audio Function
On-Chip MAC Lan
Onboard LAN Boot ROM
Onboard Serial Port 1
Onboard Parallel Port
Parallel Port Mode
x ECP Mode Use DMA
On-Chip USB
USB Keyboard Support
USB Mouse Support
Legacy USB storage detect
higf : Move Enter: Select
F5: Previous Values
On-Chip IDE Channel
Enables or disables the integrated IDE controller. (Default: Enabled)
NV Serial-ATA Controller
Enables or disables the integrated SATA controller(s). You can select whether to enable all SATA control-
lers or only the first SATA controller. (Default: All Enabled)
IDE Prefetch Mode
Enables or disables prefetch mode for the integrated IDE controller. Enabled activates the IDE prefetch
buffer to enhance hard drive performance. (Default: Enabled)
USB Memory Type
Specifies the type of memory allocated for USB devices. Options are: SHADOW (default), Base Memory
(640K).
Serial-ATA RAID Config
NV SATA RAID function
x NV SATA 1 Primary RAID
x NV SATA 1 Secondary RAID
x NV SATA 2 Primary RAID
x NV SATA 2 Secondary RAID
higf : Move Enter: Select
F5: Previous Values
NV SATA RAID function
Enables or disables RAID for the integrated SATA 3Gb/s controllers. Enabled allows you to configure
RAID for individual SATA channel. (Default: Disabled)
NV SATA 1 Primary RAID
Enables or disables RAID for the first channel of the first integrated SATA 3Gb/s controller. This item is
configurable only if the NV SATA RAID function item is set to Enabled. (Default: Enabled)
BIOS Setup
CMOS Setup Utility-Copyright (C) 1984-2009 Award Software
Integrated Peripherals
+/-/PU/PD: Value
F6: Fail-Safe Defaults
CMOS Setup Utility-Copyright (C) 1984-2009 Award Software
Serial-ATA RAID Config
+/-/PU/PD: Value
F6: Fail-Safe Defaults
[Enabled]
[All Enabled]
[Enabled]
[SHADOW]
[Press Enter]
[Auto]
[Auto]
[Disabled]
[3F8/IRQ4]
[378/IRQ7]
[SPP]
3
[V1.1+V2.0]
[Disabled]
[Disabled]
[Enabled]
F10: Save
[Disabled]
Enabled
Enabled
Enabled
Enabled
F10: Save
- 40 -
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults