Mb Intelligent Tweaker(M.i.t.) - Gigabyte GA-M68M-S2P User Manual

2-3

MB Intelligent Tweaker(M.I.T.)

Set Memory Clock
x Memory Clock
 DRAM Configuration
higf : Move Enter: Select
F5: Previous Values
Whether the system will work stably with the overclock settings you made is dependent on your over-
all system configurations. Incorrectly doing overclock may result in damage to CPU, chipset, or
memory and reduce the useful life of these components. This page is for advanced users only and
we recommend you not to alter the default settings to prevent system instability or other unexpected
results. (Inadequately altering the settings may result in system's failure to boot. If this occurs, clear
the CMOS values and reset the board to default values.)
Set Memory Clock
Determines whether to manually set the memory clock. Auto lets BIOS automatically set the memory
clock as required. Manual allows the memory clock control item below to be configurable. (Default: Auto)
Memory Clock
This option is configurable only when Set Memory Clock is set to Manual.
When you use an AM3/AM2+ CPU:
X2.00
X2.66
X3.33
X4.00
X5.33
When you use an AM2 CPU:
DDR 400
DDR 533
DDR 667
DDR 800
CMOS Setup Utility-Copyright (C) 1984-2009 Award Software
MB Intelligent Tweaker(M.I.T.)
+/-/PU/PD: Value
F6: Fail-Safe Defaults
Sets Memory Clock to X2.00.
Sets Memory Clock to X2.66.
Sets Memory Clock to X3.33.
Sets Memory Clock to X4.00.
Sets Memory Clock to X5.33.
Sets Memory Clock to DDR 400.
Sets Memory Clock to DDR 533.
Sets Memory Clock to DDR 667.
Sets Memory Clock to DDR 800.
[Auto]
x3.33 667Mhz
[Press Enter]
F10: Save
- 33 -
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults
BIOS Setup