Connect Cameras And Monitor; Connect Power - Q-See Q4DVR4RCM User Manual

Slide the carrier body out of the cartridge frame (Fig1)
Fig2
Fig3
A
B
Key Lock

3.2 Connect Cameras and Monitor

There are 4 camera inputs and 2 monitor outputs ( BNC connectors).

3.3 Connect Power

Fig1
Connect the HDD data cable and the power cable to
the HDD (Fig2)
Push the tray into the cartridge frame until fully
inserted and handle pushed downward (Fig3). Lock
tray in place and power up unit. A New HDD should
always be formatted (see HARD DISK SETUP Menu).
A: Locked Non-removable
B: Unlocked(Removeable)
Please use only the power adapter supplied with your DVR.
4
CAUTION ........
DON'T take out HDD
when DVR running!