Ntsc/Pal Output Select - Q-See Q4DVR4RCM User Manual

Installation example diagram:
VIDEO OUTPUT
PTZ Setup
Connect PIR sensor NO/NC output to DVR input terminal.(Max. 5V DC)
MOTION DETECTION SETUP
CHANNEL 1 SENSITIVITY
CHANNEL 1 SENSITIVITY
CHANNEL 1 SENSITIVITY
CHANNEL 1 SENSITIVITY
CHANNEL 1 AREA SET
CHANNEL 1 AREA SET
CHANNEL 1 AREA SET
CHANNEL 1 AREA SET
PRESS(UP,DOWN).
PRESS(MENU) TO EXIT
Digital video Recoder Monitor
Dual
4
PAL NTSC
CHANNEL 1- 4 AREA SET:
of selected channel is divided into 144(12 12) blocks, and then press[
left, press [ CH2] to move right, press [
down, press[ SEL/EDIT] to set the block is active or not. When the block is transparent,
it's active to record; when the block is covered by shadow, It can not be recorded.

5.16 NTSC/PAL Output Select

After completed the
s t a r Mo tion Re cord.
Disconnect the power supply. Change jumper JS1 to select NTSC or PAL video
output format according to the silkscreen on the circuit
CH1 CH2 CH3 CH4 1
VIDEO INPUT
RS485
1 2
RS485 SENSOR
Power
PIR Sensor
Motion Setup:
record method by Motion Triggered. Please make
4
4
4
4
Reference to 5.7.
CHANNEL 1- 4 SENSITIVITY:
THEN(SELECT)
[ SEL/EDIT] to adjust sensitivity grade of motion
Monitor
UP DATA+ POWRE
MENU
detection. .......................................................................
DOWN DATA
High(1----------9,OFF) Low, When it's off, the channel
can not be triggered by movement.
Press[ SEL/EDIT] to enter area setting state, the picture
MOTION SET
POWER
2 3 4
CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK.
DO NOT OPEN COVERS. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE
WARING: TO PREVENT FIRE OR SHOCK HAZARD. DO NOT
EXPOSE UNITS NOT SPECIFICALLY DESIGNED
FOR OUTDOOR USE TO RAIN OR MOISTURE.
DC 12V
SENSOR ALARM
3 4
Power
ALARM
The first step, User need setup video
...........................................................
UP] to move up, press [
, User can exit MENU, And press [
board.....................................
NTSC/PAL Select
10
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
PERSONNEL..........................................
. ...
Alarm
User can press
..................................
CH1] to move
DOWN]to move
...........
REC ] to