5: Mobile Phone Access - Q-See QR40198 User Manual

DVR MENU

5.2.7.5: Mobile Phone Access

The DVR is currently compatible with mobile phones running Windows Mobile, Symbian operating systems and
iPhones on 3G networks. Before you can access the DVR from a mobile phone you need to setup the Network
Configuration on the DVR. Refer to Section 5.2.3 Network Setup for complete directions for how to do this. You also
need to go to the Main Menu then Devices then Mobile and enter your user name and password, and set the Server
Port to 18004. This port also needs to be forwarded to the IP address of the DVR along with the ports from 5.2.3
Network Setup.
Please note that you can only see one channel at a time when viewing from a mobile phone. The speed of the
display depends on the speed of the internet connection.
When accessing your DVR from a mobile phone using a Windows Mobile operating system, follow these
steps:
1. Webcam installation: Begin by installing the webcam program that is included on the CD that comes with
the DVR by copying the files from the Windows folder to the mobile phone. You can do this by attaching the
mobile phone to a computer and copying the file from the CD to the memory card on the phone, or by copying
the file from the computer to the phone's memory card through a memory card reader or through a Bluetooth
connection.
(Picture 39)
2. Click the windows mobile folder (red box in Picture 39) and choose the file "QQeye" (Picture 40). Selecting
the file generates a dialog box depicted by Picture 41. The default file location as shown in Picture 41 is
"Device"; however, you can also choose the "Storage Card" option to save it to a memory card.
3. Choose your storage location and click the [Install] button (red box in Picture 41) to start the installation.
(Picture 40)
24 | P a g e
QR40198 User Manual
(Picture 41)