Login & User Management - Q-See QSDT8DP User Manual

To power off safely follow the steps below. Users can close the unit by
remote control, front panel and mouse.
By remote control:
STEP1 Press POWER button, the screen below will appear:
STEP2 Choose OK. The unit will power off automatically after shutting
down software.
STEP3 Disconnect the power
By front panel or mouse:
STEP1 Press ENTER button or click right mouse to show menu bar, refer
to Fig 4.1 Control Bar.
STEP2 Click Shut down button, refer to Fig 3.3 Shut down
STEP3 Click OK on the pop-up window. The unit will power off
automatically after shutting down software
STEP4 Disconnect the power
3.2 Login & User Management
Users can log in and out of the DVR system. Users cannot do any other
operations except changing the multi screen display once logged out.
Login:
If logged out press right mouse button to show the control bar. Press Login,
Search or System etc. A login window will appear, asking for ID and password
shown as Fig 3.4 Login.
QSDT8DP DVR User's Manual
Fig 3.3 Shut down
11